Yamaha Disklavier E3 Series Maintenance Handbook page 15

・XG Tone Generator Functions
Using the procedure described above,
select an ensemble song for playback
from the supplied CD.
Listen to the ensemble tone generator
playback from the speaker to check
sound output.
*Make sure that the speaker power is
switched ON.
*Make sure that speaker volume is
turned up.
・Recording Function  Playback  Delete
Press the [SELECT] button.
Select "Memory".
Press the [RECORD] button.
Press the [PLAY] button.
Start playing on the keyboard.
Play all 88 keys (1 to 88) and operate
each of the pedals.
Press the [STOP] button.
Use the same procedure to playback
the song you just recorded.
Press the [FUNC.] button.
Select "DELETE SONG".
Select the song you played then press
the [ENTER] button.
Press the [+/YES] button.
・Switch the power OFF
Press the power switch on the control
unit to switch the power off.
13
11