Electromagnetic Compatibility; Online Product Certification - National Instruments SCC-AO10 User Manual

Safety
This product meets the requirements of the following standards of safety
for electrical equipment for measurement, control, and laboratory use:
•
•
Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
•
•
•
•
•
Note For the standards applied to assess the EMC of this product, refer to the Online
Product Certification section.
Note For EMC compliance, operate this product according to the documentation.
For EMC compliance, operate this device with shielded cables.
Note
CE Compliance
This product meets the essential requirements of applicable European
Directives as follows:
•
•

Online Product Certification

Refer to the product Declaration of Conformity (DoC) for additional
regulatory compliance information. To obtain product certifications and
the DoC for this product, visit
number or product line, and click the appropriate link in the Certification
column.
SCC-AO10 Isolated Analog Output Module User Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
IEC 61010-1, EN 61010-1
UL 61010-1, CSA 61010-1
EN 61326 (IEC 61326): Class A emissions; Basic immunity
EN 55011 (CISPR 11): Group 1, Class A emissions
AS/NZS CISPR 11: Group 1, Class A emissions
FCC 47 CFR Part 15B: Class A emissions
ICES-001: Class A emissions
2006/95/EC; Low-Voltage Directive (safety)
2004/108/EC; Electromagnetic Compatibility Directive (EMC)
ni.com/certification
10
, search by model
ni.com