Requesting; Assistance - Whirlpool RBD245PD Use And Care Manual

PROBLEM
Cooking results are
not what you expected
CAUSE
l
The oven is not level. (See Installation Instructions.)
l
The oven temperature seems too low or too high. See
"Adjusting the oven temperature control" on page 14 to
adjust oven temperature.
l
You did not preheat the oven before baking (if called for
in recipe).
l
The recipe you are using may need to be altered to
improve the taste or appearance of the food.
l
You are using a pan that is not the correct type or size.
Refer to a reliable cookbook or recipe for recommended
pan type and size.
l
There is not enough air space around pan when baking.
Allow 1 W to 2 inches (4-5 cm) of air space on all sides of
pan. There must be a minimum space of 1 inch.
The display is showing
"PF"
"F" followed by a
number shows on the
display
l
There has been a power failure. Reset the clock. (See
page 10.)
l
The electronic control, temperature sensor, latch, or
some other electronic oven component has failed. Make
a note of what appears on the display and call for service.
(See Step 2 on page 44.)
If none of these items was causing your problem, see "Requesting Assistance or Service"
on page 44.
43