Warranty Provisions - EINHELL TH-TS 820 Original Operating Instructions

Warranty provisions

iSC GmbH or the DIY store where you made you purchase guarantees the repair of defects or replace-
ment of the equipment in accordance with the overview below. Statutory guarantee claims are unaff ec-
ted.
Category
Defect with regard to material or
construction
Wear parts*
Consumables*
Missing parts
* Not necessarily included in the scope of delivery!
For consumables, wear parts and missing parts iSC GmbH guarantees the correction of defects or a
new delivery only if the defect is reported within 24 hours (consumables), 5 work days (missing parts) or
6 months (wear parts) after purchase and the purchase date is verifi ed with the bill.
In case of defects concerning the material or construction, we kindly request you to submit the equip-
ment together with the fully completed warranty card supplied with the equipment. It is important that
you enter an exact description of the defect.
To do so, answer the following questions:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TH_TS_820_SPK1.indb 25 Anl_TH_TS_820_SPK1.indb 25
GB
Example
24 months
V-belt, carbon brushes, table 6 months
insert, push stick
Saw blade Warranty only in case of an im-
mediate defect (24 hours after
purchase / date on the bill)
5 work days
- 25 -
Warranty
22.05.13 16:36 22.05.13 16:36