BASKETBALL PROBASE PROBASE Installation Manual page 11

INSTALLATION GUIDE
14
INSERT HARDWARE
Once the main pole holder is
levelled, insert the remaining bolts
(J), flat washers* (L), nuts (K) in
each of the unused holes.
Tighten firmly.
15
INSERT THE POLE
Insert the pole of your basketball
hoop into the main pole holder (B)
by placing it on the ground and
pulling it up.
*For assemblies including flange nuts (intergrated washer nuts), you will not have flat washers in your kit.
14.1
14.3
15.1
- 11 -
14.2