Rules For The Worker Operating The Machine - Cimbali DT/A Use And Installation

BEFORE YOU START
WARNING: BEFORE YOU START OPERATING THE MACHINE, WASH THE INTERNAL
COMPONENTS FOLLOWING THE INSTRUCTIONS INDICATED BELOW.
THESE STEPS MUST BE REPEATED AT LEAST ONCE A DAY AND WHEN THE
MACHINE HAS NOT BEEN OPERATED FOR MORE THAN 8 HOURS.
Groups
•
• Let each group dispense water for about a minute.
Hot Water
• Continuously dispense hot water (pressing the appropriate button) until at least 6 liters of water
have been used for a machine with 2 groups and 9 liters for a machine with 3 groups (see the "Hot
water dispensing" chapter in the User's Manual).
Steam
• Dispense steam from the nozzles for about a minute, using the appropriate buttons.
ON THE JOB
Steam dispensing
• Before heating the beverage (water, milk, etc.), open the steam nozzle for at least 3 seconds
and let the steam escape so that the condensation is eliminated.
Coffee dispensing
• If the machine has not been used for more than an hour, before making coffee, dispense about
100 cc and discard the liquid.
Hot water dispensing
• If the machine has not been used for more than an hour, before using the hot water, dispense
about 200 cc and discard the liquid.
Cleaning the coffee circuits
•

6. Rules for the worker operating the machine

6 EN