Related Manuals for Clarke CWB300LS
Summary of Contents for Clarke CWB300LS
- Page 1 WORKBENCH WITH SHELF PART NO: CWB300LS Part No: 7637870 ASSEMBLY INSTRUCTIONS GC0416...
-
Page 2: Specification
Maximum rated load 300 kg (worktop)/100kg (shelf) GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose. -
Page 3: Safety Precautions
6. Never allow children to climb on the workbench. 7. Always ensure the load is positioned centrally and evenly distributed. 8. If replacing parts, only use those supplied by Clarke International. 9. Do not exceed the maximum rated load of 300 kg (bench/100kg (shelf) as stated on the warning labels. -
Page 4: Unpacking & Inventory
UNPACKING & INVENTORY When unpacking, check for damaged or missing parts. Any deficiencies found should be reported to your CLARKE dealer where the product was originally purchased. Do not dispose of damaged components or packaging with general household waste. They should be taken to a recycling centre and disposed of appropriately. -
Page 5: Tools Required
ASSEMBLY TOOLS REQUIRED • Rubber mallet or hammer • Protective cloth/wood block ASSEMBLY PROCEDURE 1. Assemble on a firm, level surface. Avoid assembly on a domestic carpet. 2. Always ensure that the tabs sit at the bottom of the slots. 3. - Page 6 10. Use the long support beams to connect the two end assemblies together as shown in Fig 3. 11. Add the centre support beams (F), by bending the flexible tabs to 90 degrees and slotting them into place as shown in Fig 4. 12.
-
Page 7: Spare Parts
• Always fit the worktop at the highest possible position. 17. Add the lower shelf (J) in position. SPARE PARTS In the event of damage, spare parts are available from the Clarke International parts department. Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com...