Heater Installation; Risk Of Fire/ Explosion - Dimplex DIR Series Installation Manual

Heater Installation

RISK OF FIRE/
EXPLOSION
This heater should not be
used in potentially explosive
atmospheres. Do not use in
areas where gasoline, paint
or stored.
Installation minimum
heater nameplate and in the
owner's manual must be
followed.
Before installation, read this
manual carefully and keep for
future reference.
The heater must be installed in
accordance with the manufacturer's
installation instructions.
1. This equipment shall be installed
are familiar with the construction
and operation of the apparatus
and hazard involved.
WARNING: The heater is
box and should be connected as
electrical professional. Wiring
procedures and connections should
be in accordance with the National
Electric Code (NEC) and local
codes.
2. Within USA, electrical installation
shall be made in accordance with
the National Electrical Code.
3. Within Canada, electrical
installation shall be made
according to the provisions of
section 62 of the Canadian
electrical code part 1.
4. Wiring procedures and
connections shall be in
accordance with the national and
local codes having jurisdiction.
CAUTION: Disconnect electric
power supply before working on
circuit wiring to prevent electric
shock.
CAUTION: When installing
outdoors we recommend the
heater is positioned where it will be
protected from exposure to extreme
weather such as snow and ice.
CAUTION: This heater must be
grounded.
CAUTION: Electrical connection
must have ground fault protection
(GFCI or GFI).
CAUTION: A circuit breaker is
required for proper installation, do
not load beyond 80% capacity.
CAUTION: High temperature,
drapery, furnishings, and other
7