Advertisement
Setup AL2400AC as an Client (page 1 of 2)
In Client mode the AL2400AC works as an wireless recevier.
The usage for Client mode can be to connect devices that
doesn't have wireless built-in to the wireless network, like
TV, setup-box, computers etc.
To setup AL2400AC in Client mode you MUST connect it to
your computer using a network cable.
5VDC
WiFi
ON / OFF
4
3
2
1
Internet
Reset/WPS
1. Please set the switch to CLIENT position.
2. Place the AL2400AC in an availble power outlet near (3m) the existing wireless router.
3. Open a WEB browser (Chrome, firefox etc.) and enter http://airlink.setup
4. Click Next when you see the welcome screen.
4
5. Select the wireless network you want the AL2400AC to connect to from the list and click Next.
2
5
9
1
3
Advertisement
