Advertisement
Setup AL2400AC using WPS in Client mode
WPS is a standard for easy and secure setup and connection without the need of enter any
i
encryption key.
A WPS connection is done by pushing a button on both devices, or enter a pin code..
WiFi
ON / OFF
4
3
Reset/WPS
Please make sure the WPS function is enabled in your wireless router.
See manual/FAQ for your router for how this is done.
1. Press the WPS button for X seconds(*) on the wireless router.
See the manual for your router how to do WPS.
2. Press the WPS button for 2 seconds on the AL2400AC.
3. The WPS LED on AL2400AC will now flash slowly.
4. When there is an successfull connection to an device the WPS LED will flash fast.
5. Please wait one minute for the AL2400AC to do a restart and re-connect.
6. The AL2400AC is now connected to the main wireless network and you can now connect the AL2400AC
to the device you will give internet access to (e. g. TV, set-up box, computer etc.) using a network cable.
5VDC
2
1
Internet
1
13
2
5VDC
WiFi
ON / OFF
Reset/WPS
4
3
2
1
Internet
Advertisement
