Advertisement
Setup AL2400AC using WPS in AP mode
WPS is a standard for easy and secure setup and connection without the need of enter any
i
encryption key.
A WPS connection is done by pushing a button on both devices, or enter a pin code.
1
. Press the WPS button on the AL2400AC for 2 seconds. WPS LED will start flashing.
2. Press the WPS button for 2 seconds on the device (e.g. printer) you want to connect to AL2400AC.
3. The WPS LED on AL2400AC will flash slowly until there is a device connected to it.
4. When there is an successfull connection to an device the WPS LED will flash fast.
5. Please wait one minute for the AL2400AC to do a restart and re-connect.
6. The newly added device should now connect to AL2400AC within 1 minute.
2
12
1
Advertisement
