Advertisement
Setup AL2400AC using WPS in repeater mode
WPS is a standard for easy and secure setup and connection without the need of enter any
i
encryption key.
A WPS connection is done by pushing a button on both devices, or enter a pin code.
WiFi
ON / OFF
Reset/WPS
4
3
Please make sure that the WPS function in your wireless router is enabled.
See manual for wireless router for how to use WPS.
1. Click the WPS button on the wireless router (usually for 2-3 seconds).
2. Click the WPS button on the AL2400AC for 2 seconds.
3. The WPS LED will flash slowly when WPS is ebabled.
4. The WPS LED will start flashing fast when there is an successfull WPS connection.
5. Please wait 1 minute for the AL2400AC to reboot and reconnect.
6. Now do a search for wireless networks on your device (computer, tablet etc.).
The extended network from AL2400AC will have the same name as existing network with added
_2.4Gre and/or _5Gre at the end of the name (depending on which network choosen).
AirLink00868
WiFi
ON / OFF
Reset/WPS
4
3
5VDC
2
1
Internet
1
5VDC
2
1
Internet
AirLink00868
11
2
AirLink00868_2.4Gre
Advertisement
