Advertisement
Where to place the AL2400AC?
In order for AL2400AC to work optimally it is important the you place it so it can receive good signales
from your exisiting wireless router.
Please avoid placing AL2400AC inside cabinets, behind the TV, inside tv bench etc. or near other
equipment that can generate electro magnetic radiation (TV, speakers, amplifiers etc.)
The speed/performance you get from AL2400AC is very much depending on the quality of the
received signal.
We recommend you to pay attention to the 2.4/5GHz LED when placing AL2400AC.
Please see page 16 for more information about LED status.
AL2400AC
How do I reset AL2400ac to factory default settings?
If you want to setup the AL2400AC for a different network or have any problem with it, you can
reset it back to factory default settings by following this four steps.
1. Plug the AL2400AC into to power outlet and wait 20 seconds.
2. Press and hold the WPS button for 10 seconds.
3. The WPS LED will start flashing when the reset
sequence are enabled.
4. Wait 30 seconds before you switch it off or start
a new setup.
Internettmodem
5VDC
WiFi
ON / OFF
Reset/WPS
4
3
2
1
Internet
14
Main router connected
Hovedruter (AL5000ac)
to internet.
tilkoblet internett
10 seconds
Advertisement
