Advertisement
Setup AL2400AC as an repeater (page 1 of 2)
In repeater mode the AL2400AC will work as an extender/repeater
for an existing wireless network.
If the exisiting wireless network is a dual-band
(both 2.4GHz and 5Ghz) the 2400AC will be able to extend both
networks at the same time.
WiFi
ON / OFF
4
3
2
1
Internet
Reset/WPS
1. Please set the switch to Repeater position.
2. Place the AL2400AC in an availble power outlet near (3m) the existing wireless router.
3. Do a search for available wireless networks (via computer, tablet, smartphone etc.) and connect
to the network called AirLink2400AC
4
4. Open a WEB browser window (Internet Explorer, Chrome etc.) and enter
http://airlink.setup og trykk Enter.
Click Next when you see the welcome screen.
5. A list of all available wireless networks (sorted by 2.4GHz and 5GHz) will be shown.
Please select your wireless network(s) from the list.
a) If the exisiting wireless network is dual-band (2.4Ghz and 5GHz) you can select both networks
at this point. This will result in AL2400AC repeating both networks at the same time.
b) If you wish change the name of the new wireless network you can select «I want to have a new
name for the repeated network»
c) Click Next.
5VDC
2
A
5
4
1
3
A
B
C
Advertisement
