Table of Contents
Advertisement
EN
Installation and operating manual
7. Troubleshooting and repair
In the event of a malfunction of the device, return it to the manufacturer for repair. Clean the device carefully and pack it so that
it is protected against impact. Return the device to the manufacturer, enclosing a return declaration with a detailed description
of the fault/malfunction. If your device has come into contact with a hazardous substance, also enclose a declaration of
decontamination. The relevant templates can be downloaded from our homepage at www.beko-technologies.com. If your device
arrives at our service workshop without a declaration of decontamination, and should our personnel be concerned about any
media with which it might have come into contact, we will contact you. A repair will only be performed after we have received
the relevant declaration of decontamination. If the device has been exposed to a hazardous substance, take all necessary safety
precautions when cleaning it!
BEKOMAT
8/9
23
®
Advertisement
Table of Contents
