Table of Contents
Advertisement
EN
Oscillator
Sensor
Sensor-Kreis
Sensor loop
MAX
MIN
Connecting power cable:
•
Push the cable through the cable screw and connect it to terminals L1, N, PE
Alarm signal line:
The device is equipped with a floating alarm relay (changeover) for the transfer of alarm signals in the event of a fault:
•
push the cable through the second cable screw and connect it
N.C. – COM:
Contact is made in the event of a fault or power failure (fail-safe contact)
N.O. – COM:
Contact is made during normal operation
•
Tighten cable screw(s)
•
Mount the top part of the cover and tighten the screws
•
Mount the housing cover and tighten the screws
BEKOMAT
8/9
®
Netzteil
Power supply
Zeitauswertung
Ventilsteuerung
Time analysis
Valve control
Alarmkontrolle
Alarm monitoring
Installation and operating manual
L1
1.D
Netzanschluss
N
1.1
Power
PE
Gehäuse Housing
PE
PE
Magnetventil
N
2.0
Solenoid valve
V1
2.1
N.C
3.0
Alarmkontakt
COM
3.1
Alarm contact
3.2
N.O
17
Advertisement
Table of Contents
