Table of Contents
Advertisement
EN
BEKO TECHNOLOGIES GMBH
Im Taubental 7
41468 Neuss, GERMANY
Phone: +49 2131 988-0
www.beko-technologies.de
EC / EU Declaration of Conformity
We herewith declare that products named below conform to the applicable directives and technical
standards. This declaration applies exclusively to the products as delivered. It does not cover components
added at a later stage or modifications made after delivery.
Product designation:
Type:
Voltage options:
Pressure options:
Product description and function:
Pressure Equipment Directive PED 97/23/EC
Applied conformity assessment procedure:
Low-Voltage Directive 2006/95/EC
Applied standards:
Year of CE-labeling
The devices with working voltage of 24VDC and 24VAC are not in the scope of the Low-Voltage Directive.
EMC-Directive 2004/108/EC
Applied standards:
RoHS II Directive 2011/65/EU
The products meet the requirements laid down in European Directive 2011/65/EU concerning the restriction
of the use of certain hazardous substances in electrical and electronic devices.
Neuss, 21/09/2015
BEKOMAT
8/9
®
Condensate drain
BEKOMAT 8, BEKOMAT 9
24VAC/ 100VAC/ 110VAC
200VAC, 230VAC:
0,5 - 10 bar (g) (only BEKOMAT 8)
0,5 - 4 bar (g) (only BEKOMAT 9)
Condensate drain for the electronically level-controlled
discharge of condensate in the compressed-air system.
Module A Internal production control, Category I
EN 61010-1 2010
Section 1-14, 16, 17 Annex A-D, F, G. I-, ZA
2003
EN 55011: 2009, group 1, class B; EN 61326: 2013
BEKO TECHNOLOGIES GMBH
ppa Christian Riedel
Head of Quality Management
Installation and operating manual
25
Advertisement
Table of Contents
