Advertisement
Click
Seeed STM32F4 Board(JP mirror) by Seeed K.K.
click on it to finish the step, this process takes about 5 minutes to half an hour, which
depend on the speed of your network. Click on Tools > Manage Libraries, and
enter
to the text box.
Wio
Click
Wio LTE for Arduino by Seeed K.K.
finish the step.
Unzip the
sample
sketch, and open
Step2 Download the code
1. Press and hold BOOT button at back side of the Wio LTE and plug the USB to PC.
2. We will see STM BOOTLARDER in device manager.
3. Select Tools→Boards→Wio_Tracker_LTE.
then an Install button appear, click on it to
wiortc-sample.ino
then an Install button appear,
with Arduino IDE.
Advertisement
Need help?
Do you have a question about the Wio Extension RTC and is the answer not in the manual?