Bailey INFI 90 Instruction page 5

Safety Summary
GENERAL
WARNINGS
SPECIFIC
WARNINGS
SPECIFIC
CAUTIONS
viii
Equipment Environment
All components, whether in transportation, operation or storage,
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to insure that contact with
energized parts is avoided when servicing.
Special Handling
This module uses electrostatic sensitive devices (ESD).
Disconnect power before installing dipshunts on the module mount-
ing unit backplane. Failure to do so will result in contact with cabinet
areas that could cause severe or fatal shock. (p. 3-8, 3-12, 3-20)
Wear eye protection whenever working with cleaning solvents.
When removing solvents from printed circuit boards using com-
pressed air, injury to the eyes could result from splashing solvent as
it is blown off the printed circuit board. (p. 6-1)
Never operate the ICT module with the machine fault timer circuit
disabled (jumper pins connected). Unpredictable module outputs
may result. These unpredictable module outputs may adversely
affect the entire communication system. (p. 3-16)
To avoid potential module damage, evaluate your system for com-
patibility prior to module installation. This module uses connections
to the module mounting unit backplane that served other functions
in early Network 90 systems. (p. 3-19)
®
I-E96-610A