English - Electrolux E7TB1-4GB Instruction Book

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux
accessories and spare parts. They have been designed especially for your product. This product is designed with
the environment in mind. All plastic parts are marked for recycling purposes.
COMPONENTS
A. Jug
B. Spout
C. Lid with filler hole
D. Measuring cup
E. Blades and blade assembly
F. Blender base with cord storage
G. Non-slip feet
H. Multi-chopper jar*
I. Multi-chopper blade assembly*
J. Filter*
Picture page 2-3
GETTING STARTED
1
Before using your appliance for the first time: Remove all packing material such as plastics, stickers or tags that
may be attached to the blender base, bowls or attachments.
Clean the appliance and accessories, see instructions: "Cleaning and Care".
2
Prepare the ingredients: Rinse ingredients thoroughly. Cut the ingredients into 4 to 6 pieces and remove any
hard or large seeds. Remove any thick peel from the fruit or vegetables.
3
Place the jug on the blender base with the handle to the right. Rotate it clockwise until it clicks into position.
(The jug can only be placed in one position). When locked, the symbol
symbol on the blender base. Put the ingredients in the jug. (Do not exceed the maximum level as indicated on
the jug.)
4
Close the lid. Insert the measuring cup by rotating clockwise until it clicks into position.
(You can add ingredients through the filler hole. Never remove the measuring cup or the lid while running the
product.)
Caution! Never run the blender empty. When processing hot liquids, see step 5.
5
Processing hot liquids: We recommend to allow hot liquids to cool down (max 90 °C) before filling the jug.
Fill the jug only half full and start processing on low speed. The blender jug can become very warm – take care
to protect your hands and to ventilate steam out through the filler hole. Always replace the lid before use.
6
Start the blender: Plug into mains. Press the ON/OFF-button (M), The buttons will light up illuminating the
display. Press the 1 (Low), 2 (Medium) or 3 (High) button, to select your desired processing speed.
Attention! After 5 seconds of inactivity the product goes into sleep mode. In order to wake the blender up press
any button. You can continue working with the blender.
7
Caution! Keep hands and utensils out of the blending jug while blending.
Caution! Never run the blender empty, running the blender empty can cause overheating and damage the
product.
8
You have preset speeds (1, 2, 3), dedicated recipe programs, and Pulse mode to choose from. The selected
speed or recipe program will light up. The blender will operate until the program is finished. To stop any program
manually, press any button.
9
With Pulse you can give the ingredients a quick mix to get to your desired consistency. Press the Pulse button
(N) to go into Pulse mode. The Pulse and the speed buttons start blinking. Press 1 (Low), 2 (medium), or 3 (high)
to pulse at different speeds.
10
The product comes with a variety of recipe programs. You can choose between a number of recipes which are
Ice crush (P), Drink* (Q), Smoothies (O) and Soup (R) (*depending on the model). The blender will stop automati-
cally when the program is ready.
Attention! After 5 seconds of inactivity the product goes into sleep mode. In order to wake the blender up press
any button. You can continue working with the blender.
6
K. Take away bottle*
L. Spill-proof drinking lid with carry handle*
Control panel
M. ON/OFF-button
N. Pulse button
O. Smoothie button
P. Ice Crush button
Q. Drink button
R. Soup button
*Certain models only
on the jar should be aligned with the
www.electrolux.com