Multi-Function Meter Unit - Yamaha Tenere 700 Owner's Manual

Instrument and control functions
Immobilizer system indicator
light " "
When the vehicle is turned off and 30
seconds have passed, the indicator
light will flash steadily to indicate the
3
immobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobi-
lizer system is still enabled.
TIP
When the vehicle is turned on, the light
will come on for a few seconds, and go
off. Otherwise, have a Yamaha dealer
check the vehicle.
Troubleshooting
If a problem is detected in the immobi-
lizer system, the light will flash in a pat-
tern. If the immobilizer
indicator light flashes in the pattern,
slowly 5 times then quickly 2 times, this
could be caused by transponder inter-
ference. If this occurs, try the following.
1. Make sure there are no other im-
mobilizer keys close to the main
switch. Other immobilizer system
keys may cause signal interfer-
EAUM3622
ence and prevent the engine from
starting.
2. Use the code re-registering key to
start the engine.
3. If the engine starts, turn it off, and
try starting the engine with the
standard keys.
4. If one or more of the standard
keys do not start the engine, take
the vehicle and all keys to a
Yamaha dealer to have the stan-
dard keys re-registered.
system

Multi-function meter unit

1. Top set button
2. Bottom set button
3. "OFF-ROAD ABS ON/OFF" button
3-5
1
2
EAUM4172
3