Yamaha Tenere 700 Owner's Manual page 25

short press on the top button will incre-
ment the unit from "9" to "0". Push the
bottom set button to select the next
digit and set it following the same pro-
cedure as the first digit. Push the bot-
tom set button to select the last digit
and follow the same procedure. Push
the bottom set button to confirm the
value.
TIP
 The maximum possible entering
value is 900 km or 600 mi.
 The countdown tripmeter will start
as soon as you begin riding. When
the countdown reaches "0" the
display changes to the countdown
tripmeter "TRIP CD" and flashes
10 times.
 To reset the countdown tripmeter,
select it and while the digits flash,
push the bottom set button until it
is reset.
Instrument and control functions
Instantaneous fuel consumption
1
1. Instantaneous fuel consumption display
This function calculates the fuel con-
sumption under current riding condi-
tions.
The instantaneous fuel consumption
display can be set to either "km/L",
"L/100 km" when using kilometers.
To switch the the fuel consumption
units, push the top set button until the
measurement units change. When us-
ing miles, the fuel consumption unit is
"MPG".
 "km/L": The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
3-10
 "L/100 km": The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
 "MPG": The distance that can be
traveled on 1.0 Imp.gal of fuel un-
der the current riding conditions is
shown.
To switch the instantaneous fuel con-
sumption settings, push and hold the
left set button until the display chang-
es.
TIP
If traveling at speeds under 20 km/h
(12 mi/h), "_ _._" is displayed.
Average fuel consumption
1
1. Average fuel consumption display
3