Handlebar Switches - Yamaha Tenere 700 Owner's Manual

Brightness control mode
1
1. Brightness level display
The brightness level of the multi-func-
tion meter unit panel can be adjusted.
To adjust the brightness
1. Turn the key to "OFF".
2. Push and hold the top set button.
3. Turn the key to "ON" and continue
pushing the top set button until
the display switches to the bright-
ness control mode.
4. Push the bottom set button to set
the brightness level.
5. Push the top set button to confirm
the selected brightness level and
exit the brightness control mode.
Instrument and control functions
TIP
There are 6 brightness level settings.
3-12

Handlebar switches

Left
1
2
3
4
5
1. Hazard switch " "
2. Pass switch "PASS"
3. Dimmer switch " / "
4. Turn signal switch " / "
5. Horn switch " "
EAU1234M
3