Yamaha Tenere 700 Owner's Manual page 23

The clock uses a 12-hour time system.
TIP
When the main switch is turned off, the
clock can be viewed by pushing the
top set button.
To set the clock
1. Turn the key to "ON".
2. Push the bottom set button and
top set button together until the
hour digits start flashing.
3. Push the bottom set button to set
the hours.
4. Push the top set button and the
minute digits will start flashing.
5. Push the bottom set button to set
the minutes.
6. Push the top set button to confirm
settings and start the clock.
TIP
When setting the hours and minutes,
push the bottom set button briefly to
increase the increment value one by
one, or push and hold the button to in-
crease the increment value continu-
ously.
Instrument and control functions
OFF-ROAD Indicator
This indicator comes on when the ABS
has been manually disabled.
To switch off the ABS
1. Turn the key to "ON".
2. The vehicle being stationary, push
the "OFF-ROAD ABS ON/OFF"
button until the "ABS OFF" warn-
ing light starts flashing, then re-
lease the button.
3. The "ABS OFF" warning light and
"OFF-ROAD" indicator will come
on simultaneously.
TIP
The ABS will be disabled until the key
is turned to "OFF", or the engine stop
switch is turned to " " (stop) when
the engine is running or you stop the
vehicle and push the "OFF-ROAD ABS
ON/OFF" button again. The "ABS
OFF" warning light and the "OFF-
ROAD" indicator will turn off.
WARNING
Always ride on paved roads with the
ABS turned on. Riding on public
roads with the ABS disabled may be
3-8
illegal and void your insurance. Turn
the ABS off only when riding on non-
paved surfaces.
Multi-function display
1
1. Multi-function display
The multi-function display can show:
 an odometer
 two tripmeters
 a countdown tripmeter
 a fuel reserve tripmeter
 an instantaneous fuel consump-
tion display
 an average fuel consumption dis-
EWAM1050 play
 a coolant temperature display
 an air temperature display
 a brightness control mode
3