10.1 Supplier's Declaration of
Conformity
Issuer: Husqvarna AB, Drottninggatan 2, S-561
82 Huskvarna, Sweden
www.husqvarnagroup.com.
Responsible party: Husqvarna Professional
Products, Inc. 9335 Harris Corners Parkway
Suite 500 Charlotte, NC 28269 United States
U.S. Contact information: Michael Campbell, Sr
Director Quality, test compliance, Telephone: +1
704 597 5000.
10.2 Compliance requirements
FCC ID: XPYSARAG350 (Automower
2G)
FCC ID: XPY1CGM5NNN (Automower
module 2G/3G).
FCC ID: XPYUBX18ZO01 (Automower
2G/4G)
FCC ID: ZASHQ-BLE-1A and FCC ID ZASHQ-
®
BLE-1B (Bluetooth
module).
The Bluetooth module is located on the HMI-
board (PCBA) in the upper chassis. It must only
be accessed by an authorized service technician.
WARNING: To comply with RF
exposure requirements, please
maintain a separation distance of at
least 20 cm/7 inches from any part of
the product.
Models with a hatch: The supplied label shall be
attached to the product according to figure below.
Husqvarna
Automower
This device contains the module
FCC ID: XPY1CGM5NNN
1457 - 001 - 29.01.2020
10 Applicable to US/CA market
Models without a hatch: The supplied label shall
be attached to the product according to figure
below
®
Connect
Note: Changes or modifications made to this
®
Connect
equipment not expressly approved by Husqvarna
may void the FCC authorization to operate this
equipment.
®
Connect
Note: This device complies with Part 15 of the
FCC Rules [and with Industry Canada licence-
exempt RSS standard(s)]. Operation is subject to
the following two conditions: this device may not
cause harmful interference, and this device must
accept any interference received, including
interference that may cause undesired operation.
Connect
®
Husqvarna
Automower
®
Connect
This device contains the module
FCC ID: XPY1CGM5NNN
Applicable to US/CA market -
59