Automower ® Connect - Husqvarna AUTOMOWER 550H Operator's Manual

Note: The Bluetooth
active for 3 minutes. If pairing has not
been successful within this time period,
switch off the product. Wait until the LED
status indicator is not lit, and then switch
on the product again.
2. Enter the factory PIN code.
3. Log in to your Husqvarna account in the
®
Automower Connect app.
®
4. Start Bluetooth on your mobile device.
My mowers in the Automower
5. Select
Connect app, and then select the plus sign
(+).
6. Select model. The Automower
app searches for available products within
short-range (Bluetooth
7. Select product.
8. Obey the instructions in the Automower
Connect app.
Note: It is only necessary to pair the Automower
Connect app and the product once.
®
3.10 Automower Connect
The app gives 2 modes of connectivity: Long-
range cellular connectivity and Short-range
®
Bluetooth connectivity.
The product can connect to mobile devices that
®
have the Automower Connect app installed.
®
Automower Connect is a free app for your
mobile device. The Automower
gives extended functions to your Husqvarna
product. You can:
• See the status of your product.
• Change settings to your product.
• Get extended product information.
• Get an alarm if the product moves out of the
work area.
• See statistics of your product.
Note: All countries do not support Automower
Connect because of regional specified cellular
systems. The included Automower
lifetime service only applies if there is a third part
sub-supplier of 2G/3G/4G available in the
operational area.
24 - Installation
®
pairing mode is
®
®
Connect
®
).
®
®
®
Connect app
®
®
Connect
®
The Automower Connect app is preferable if
you have one or few products installed. For users
with several products we recommend you to use
Husqvarna Fleet Services
™
Fleet Services on page 31 .
3.10.1 To install the Automower
app
1. Download the Automower
your mobile device.
2. Sign up for a Husqvarna account in the
®
Automower Connect app.
3. Log in to your Husqvarna account in the
®
Automower Connect app.
3.10.2 To pair Automower
the product
To do the basic settings on
1. Do step 1-7 in
page 23 .
2. Obey the instructions in the Automower
Connect app.
3.10.3 Dashboard
The dashboard shows the current status of the
product both visually and in text. It is very easy to
control the product by selecting the options, for
Park .
example
In the lower part of the dashboard there are
Schedule settings and the Map .
shortcuts to the
The dashboard also shows symbols according to
below:
1. The battery status shows the battery state of
charge. A flash is shown over the battery
symbol when the product charges its
battery. A plug is shown over the battery
symbol when the product is in the charging
station without charging.
2. Cutting height.
™ Husqvarna
. Refer to
®
Connect
®
Connect app on
®
Connect and
®
1457 - 001 - 29.01.2020