Changing The Dust Bag - Panasonic Quickdraw MC-V7522 Operating Instructions Manual

Lightweight vacuum
Table of Contents

Advertisement

Changing the Dust Bag

Grooves
Ouvertures
Ranuras
Tabs
Languettes
Lengüetas
WARNING
Electrical Shock or Personal
Injury Hazard.
Disconnect the electrical supply before
servicing or cleaning the unit. Failure to
do so could result in electrical shock or
personal injury from cleaner suddenly
starting.
Always operate vacuum with genuine
Panasonic Type U3 Standard or U6
Electrostatic dust bags installed.
Panasonic dust bags can be purchased
through any authorized Panasonic
dealer or ordered from a service
company.
➢ ➢ Pull outward on dust cover grip to
remove the dust cover.
➢ ➢ Remove dust bag by grasping
cardboard portion and pulling out.
➢ ➢ Spread out new dust bag, taking care
not to tear bag.
➢ ➢ Attach new dust bag onto bag holder
by holding cardboard portion and
pushing back and tuck into dust
compartment fully.
➢ ➢ Reinsert tabs on end of dust cover
into grooves on dust compartment to
allow cover to rotate closed.
➢ ➢ Rotate dust cover up into closed
position and press into place without
pinching dust bag.
- 32 -

Advertisement

Table of Contents
loading

Table of Contents