Changing The Dust Bag - Panasonic MC-V7320 Operating Instructions Manual

CHANGING THE DUST BAG
Always operate the vacuum with a genuine Panasonic Type U3 (Standard) or U6
(Electrostatic) dust bag installed Panasonic dust bags may be ordered through
any authorized Panasonic dealer
t Pull outward on the N t p 2. To remove the dust
dust cover grip,
located on the top
front of the dust
cover and remove
the cover
3 Spread out the end of the
new dust bag
NOTE Pull carefully so
as not to tear the bag at
the folds
Reinsert the tabs
provided on the end
of the dust cover into
the grooves on the
dust compartment
to allow the cover
to rotate closed
NOTE The dust
cover must be
completely
and correctly
installed for [i
proper V;
operation PLL j
5 j
P nen
bag, grasp the
cardboard portion
of the dust bag
and pull it out
Attach the new dust
bag onto the bag
holder by holding
the bag collar and
pushing back as
illustrated
Rotate the dust cover up
into the closed position
and press into place
NOTE The dust bag
should not be caught
between the
lower edge
of the dust
cover and
the gasket as
indicated by
the arrow In
the illustration