Table of Contents
Advertisement
Wand
"J" Slot
Tube
Fente en "J"
Tubo
Ranura en "J"
Raised Tab
Saillie
Lengüeta
saliente
Slot
Fente
Ranura
Tool Storage
Hose
Tuyau
Manguera
Upper Tab
Languette supérieure
Ranura superior
➢ ➢ Remove any shipping tape from the
dust or belt cover.
➢ ➢ Attach wand to hose by aligning the
two (2) raised tabs on wand with "J"
slots in hose, guide tabs along
grooves, twist to lock in place.
➢ ➢ Loop hose over hose holder on front
of handle.
➢ ➢ Insert wand in holder, push and twist
firmly onto connector pipe to assure
a good connection.
➢ ➢ The attachment holder provides
convenient, removable storage for
tools.
➢ ➢ To attach holder to vacuum, insert
upper tab into slot next to the On-Off
switch, and push down firmly.
➢ ➢ Store other wand, with dusting brush
on top, in round slot of attachment
holder.
➢ ➢ Place crevice tool into rectangular
slot of attachment holder.
➢ ➢ Refer to PARTS IDENTIFICATION
section for tool location.
➢ ➢ To remove attachment holder from
vacuum, lift up on attachment holder.
- 14 -
Advertisement
Table of Contents
