Using Tools - Panasonic Quickdraw MC-V7522 Operating Instructions Manual

Carpet-Bare Floor Selector
Sélecteur tapis/plancher
Selector Carpet-Bare Floor
Hose
"J" Slot
Tuyau
Fente en "J"
Manguera
Ranura en "J"
Dusting
Brush
Brosse à
épousseter
Cepillo para
sacudir
Crevice Tool
Suceur plat
Herramienta
para hendiduras

Using Tools

Extension Wand
Tube
Tubo extensión
Raised Tab
Saillie
Lengüeta saliente
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Extension Wand
Tube
Tubo extensión
Hose
Tuyau
Manguera
➢ ➢ Always place carpet-bare floor
selector in BARE FLOOR (TOOLS)
position when using tools.
➢ ➢ Remove wand from holder by
twisting and pulling up.
➢ ➢ The tools can be attached to hose,
wand(s) or crevice tool .
➢ ➢ For extended reach, connect the
extra wand to extension wand and
hose. Firmly push wands together
for secure fit.
➢ ➢ DO NOT overextend your reach with
hose as it could tip vacuum.
➢ ➢ The Crevice Tool may be used on the
following items:
• Furniture
• Cushions
• Drapes
• Stairs
• Walls
➢ ➢ The Dusting Brush may be used on
the following items:
• Furniture
• Drapes
• Stairs
• Walls
Note: Always clean tools before using
- 26 -