Mhouse MhouseKit WK2 Manual

MhouseKit WK2
For wood or PVC swing gates with large pillars
Kit for automation
of a residential two-leaf gate,
each leaf measuring
up to 1.8m in width
and weighing up to 200kg
Especially suitable for gates
made of wood or PVC
Easy installation with the Mhouse
ECSBus system: only two wires are
required for polarity free connection
of the main system components.
The colour-coded terminals, each of which
identifies a set, enable quick, error-proof
Connections. The aerial is integrated in the
flashing light for greater protection.
No welding is required for system installation
Compact and fast: WK2 is ideal for gates
with very deep pillars, which can be easily
operated thanks to its articulated arm.
Its smooth and precise movements make
it suitable for the most delicate gates
No waiting in front of the gate:
only 10 seconds to open and close
(in perfect installation conditions, making the most
of the whole run and with a 90° opening)
"Plug 'n Play" connections
very simple and quick, with easy
identification of wires and terminals
Extra safe thanks to the low-voltage
connections (24V), the safety accessories
and the automatic obstacle detection feature
Auto-programming: WK2 automatically
calculates the most suitable operating
parameters for each gate
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters (up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO-8.2K
safety devices, if installed
Quick motor release
for manual gate operation
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory)
Mhouse
Via Pezza Alta 13
31046 Oderzo TV Italia
Tel. +39 0422 202 109
Fax +39 0422 853 585
info@mhouse.biz
www.mhouse.com