Advertisement
The router can be used with the following types of rotary cutting
bits:
●
slotter bit
●
roundover bit
●
trim bit
Do not use this product in any other way as stated for normal
use.
BATTERIES
Battery packs that have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure to
heat or sunshine (risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum lifetime, after use, the battery packs have to
be fully charged.
To obtain the longest possible battery life, remove the battery
pack from the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C
and away from moisture
Store the battery packs in a 30% – 50% charged condition.
Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
In extremely high torque, binding, stalling, and short circuit
situations that cause high current draw, the product vibrates
for about 2 seconds, and then the product turns OFF.
To reset, release the trigger.
Under extreme circumstances, the internal temperature of the
battery could become too high. If this happens, the battery
shuts down.
Place the battery on the charger to charge and reset it.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in accordance
with local, national and international provisions and regulations.
●
Batteries can be transported by road without further
requirements.
●
Commercial transport of lithium-ion batteries by third parties
is subject to Dangerous Goods regulations. Transport
preparation and transport are exclusively to be carried out
by appropriately trained persons and the process has to be
accompanied by corresponding experts.
When transporting batteries:
●
Ensure that battery contact terminals are protected and
insulated to prevent short circuit.
●
Ensure that battery pack is secured against movement
within packaging.
●
Do not transport batteries that are cracked or leaking.
Check with forwarding company for further advice.
MAINTENANCE
Use only MILWAUKEE accessories and spare parts. Should
components that have not been described need to be replaced,
contact one of our MILWAUKEE service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the product can be ordered.
State the product type printed and the serial number on the
label, and order the drawing at your local service centres.
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting
any work on the product.
Accessory - Not included in standard
equipment; available as an accessory.
Read the instructions carefully before
starting the product.
Wear eye protection.
Do not dispose of electric tools, batteries/
rechargeable batteries together with
household waste material.
Electric tools and batteries that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling facility.
Check with your local authority or retailer for
recycling advice and collection point.
29
29
English
Advertisement
