Related Manuals for Milwaukee M18 FDCPF8
Summary of Contents for Milwaukee M18 FDCPF8
- Page 1 OPERATOR'S MANUAL Cat. No. M18 FDCPF8 M18™ FUEL™ DRAIN SNAKE WITH CABLE-DRIVE™ LOCKING FEED SYSTEM WARNING To reduce the risk of injury, user must read and understand operator's manual.
-
Page 3: Safety Warnings
GENERAL POWER TOOL Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left SAFETY WARNINGS attached to a rotating part of the power tool may Read all safety warnings, instruc- WARNING result in personal injury. Do not overreach. - Page 4 If unreadable or missing, contact Never service damaged battery packs. Service ® a MILWAUKEE service facility for a replacement. of battery packs should only be performed by the Some dust created by power sanding, WARNING manufacturer or authorised service providers.
- Page 5 SPECIFICATIONS ASSEMBLY Cat. No...........M18 FDCPF8 Recharge only with the charger WARNING Volts ..............18 DC Cable Spin No Load RPM ........0 - 600 Cable Feed Speed Inches/Second ..0-203mm (0-8") manual supplied with your charger and battery. Battery Type ............. M18™...
- Page 6 ® feed position by pushing and holding the handle the tool, battery pack, and charger to a MILWAUKEE service facility for repair. After six months to one year, forward. To lock the front handle in the feed position, twist the front handle a quarter turn to the right.
- Page 7 Cleaning Cable and Bucket every use to prevent damaging effects of sediment and drain cleaning compounds. The bucket should also be cleaned regularly. WARNING! Wear leather gloves. After washing, dry the cable and bucket completely. Then, wipe cable with an oiled rag before returning it to the drum according to the instructions in "Cable Installation".
- Page 8 SERVICE - AUSTRALIA and NEW ZEALAND MILWAUKEE ® prides itself in producing a premium quality product that is Nothing But Heavy Duty ® . Your satisfaction with our products is very important to us! If you encounter any problems with the operation of this tool, please contact your authorised MILWAUKEE ®...