Limitless™ WPMM Series
2.2
Certification and Approvals
See the product label for applicable approvals and ratings.
Table 7 – Approvals and Ratings
Approval/Item
Enclosure Type
Federal Communications Commission (FCC)
Industry Canada (IC)
European Telecommunications Standards Institute (ETSI)
Australian Communications and Media Authority (ACMA)
2.3
Radio Module Specifications
Table 8 – Radio Module Specifications
Item
Wireless standard
Data rate
Operating Frequency
Module transmit power
Receive sensitivity (typ.)
# of pairing (max.)
WARNING
* The WPMM must be installed in accordance with the requirements specified in this document. See
Section 3 and Section 4 for EIRP requirements. Only the specified EIRP power settings, antenna
types and gains and cable lengths (attenuation) as outlined in this document are valid for WPMM
Series installations.
2.4
Electrical Specifications
Table 9 – Electrical Specifications
Item
Supply voltage
Supply current
Output type
Load current
Leakage current
Voltage drop
Termination
2.5
EMC Specifications
The latest applicable EMC Standards are as follows:
• EN 300 328, V1.7.1
• EN 61326-1 (2006)
• EN 301 489-1, V1.8.1
• EN 301 489-17, V2.1.1
Specification
IEEE 802.15.4
WPAN
Direct Sequence Spread Spectrum (DSSS), 2.4 GHz
250 kbps
ISM 2.4 GHz
18 dBm or 10 dBm (Maximum transmit power will vary by country usage requirements)
-100 dBm
Up to 16 Limitless™ limit switches can be paired to a single WPMM
Specification
10 Vdc to 30Vdc
750 mA max.
NPN current sinking, normally open
5 mA to 200 mA
50 uA max.
1.75 Vdc max. @ max. load @ 25 °C [77°F]
Three quick connect, 0.25 inch male blade
Issue 2
Ratings/Description
IP67
FCC Part 15.247
Canadian ICES-003
CE mark
C-Tick mark
Honeywell Sensing and Control
50051864
5