Blaupunkt FPC401 Owner's Manual page 7

FPC401
1. Measuring cup
2. Lid
3. Body with popping chamber
BEFORE FIRST USE
Clean the measuring cup, lid and popping chamber with a damp cloth. Insert the plug into a mains
socket and switch on the appliance for 2 minutes (to get rid of the smell which accompanies the first
use). Ensure sufficient ventilation in the room. Let the appliance cool down before preparing the first
portion of popcorn.
USING THE POPCORN MAKER
1. Place device on flat, dry surface.
2. Open the popper measuring cup (1), put the right amount of corn into the popping chamber (the
amount of corn shall not exceed 60g). Do not add more corn than recommended.
3. Place the lid (2) on the body (3) and cover up it with the measuring cup (1) curved section facing
down into the opening.
4. Place a container for the popcorn underneath the chute.
5. Plug the appliance into a power outlet and turn the switch "on" (4). The appliance will begin to
operate.
Caution: Preheating is not necessary before popping, do not touch the lid (2) and the popper
measuring cup (1) to prevent burning.
Note: The max operation time per time shall not exceed 5 minutes and minimum 30 minutes rest
time must be maintained between two consecutive cycles.
6. After finish the popping , turn the switch "off "(0) and unplug the plug from wall outlet.
CAUTION: AFTER POPPING, THE POPPING CHAMBER IS EXTREMELY HOT. DO NOT REMOVE LID OR
PUT HANDS NEAR CHAMBER UNTIL IT COMPLETELY COOL DOWN.
If you want to popping more corn, transfer popcorn from the containers bowl to another container,
follow steps 2 to 6 above. Remember the product can work continuously twice only.
CLEANING AND MAINTENANCE
1. Your popcorn maker should be cleaned after each use. Always allow popper to cool down before
cleaning.
2. The chute and measuring cup can be wiped clean with a damp cloth, or wash with mild detergent
and rinse to clean.
NOTE: Never immerse the popcorn maker in water.
4. On/Off switch
5