Yardworks 060-1700-4 Instruction Manual page 13

model no. 060-1700-4 | contact us: 1-866-523-5218
PROBLEM
1.1. Power is off
1.2. Defective on/off switch
1. Equipment
1.3. Worn carbon brushes
does not start
1.4. Defective motor
1.5. Grass too long
2. Motor stops 2.1. Blockage by foreign object 2.1. Remove the foreign object
3.1. Cut height too low
3.2. Blade blunt
3. Result
unsatisfactory
or motor labours
3.3. Blade area blocked
3.4. Blade assembled
incorrectly
4.1. Blade blocked by grass
4. Blade fails to
turn
4.2. Blade screw loose
5.1. Blade screw loose
5. Strange noises,
rattling or
vibrations
5.2. Blade damaged
6.Motor runs but
6.1 Belt drive broken
blade fails to turn
CAUSE
1.1. Check the socket, cord and plug
and have any repairs carried and out
by an electrician
Repair by authorized service
centre.
5. Set a higher cutting height. Lift
the front wheels slightly by pressing
down on the handle bar.
3.1. Set a higher cutting height
3.2. Have the blade sharpened or
replace it
3.3. Clean the equipment
3.4. Install the blade correctly
4.1. Remove the grass
4.2. Tighten the blade screw
5.1. Tighten the blade screw
5.2. Replace the blade
6.1 Repair by authorized service
centre
SOLUTION
13