General Cleaning - Yardworks 060-1700-4 Instruction Manual

model no. 060-1700-4 | contact us: 1-866-523-5218
THE GOLDEN RULES FOR CARE
• Keep the product clean. Remove debris from it after each use and before storage.
• Regular and proper cleaning will help ensure safe use and prolong the life of the
product.
• Inspect the product before each use for worn and damaged parts. Do not operate it if
you find broken and worn parts.

GENERAL CLEANING

• Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
• Remove stubborn dust with compressed air (max. 3 bar).
• Check for any damage and wear. Repair damages in accordance with this instruction
manual or take it to an authorized service centre before using the product again.
• Keep the underbody and blade clean and free of debris.
• All nuts and bolts must be checked periodically for tightness before operation. After
prolonged use, especially in sandy soil conditions, the blade device will become worn
and lose some of the original shape. Cutting efficiently will be reduced and the blade
should be replaced.
• Keep the blade sharp to ensure a good cutting performance. Replace a worn or
damaged blade with a new one of the same type or have it sharpened by a qualified
specialist.
• Undo the fastening bolt.
• Remove the blade and replace with a new one. Blade model: GM01BX0011
• When fitting the blade, make sure it is installed in the right direction. The blade's air
vanes must point toward the motor compartment.
• Then retighten the fastening bolt. The tightening torque should be approximately 25
Nm.
STORAGE
• Clean the product as described above.
• Store the product and its accessories in a dry, frost-free place.
• Always store the product in a place that is inaccessible to children.
The ideal storage temperature is between 10 and 30 °C.
• We recommend using the original package for storage or covering
the product with a suitable cloth to protect it against dust.
WARNING: Before inspecting, cleaning or servicing the
!
machine, unplug the power cord and wait for all moving
parts to stop. Failure to follow these instructions can
result in serious personal injury or property damage.
11