Hydran* 201i Instruction Manual
14
MAINTENANCE
The maintenance schedule suggested in this Chapter provides optimum performance
and reliability from the Hydran 201i System. The maintenance routines should be
performed in fair weather.
WARNING
Note: Some steps in the maintenance procedures described in this Chapter may not
apply, depending on the option(s) installed.
CAUTION
14.1 Cleaning the Enclosure Exterior
WARNING
There are no inside parts that you can service; maintenance or cleaning of internal
parts is not necessary.
To clean the exterior of the enclosure, use a clean cloth that is dry or slightly damp.
CAUTION
MA-033
Rev. 14.0, 12-Nov-18
All procedures in this manual must be strictly adhered to. Any
deviation from these could cause irreversible damages to the
transformer being monitored and/or the Hydran 201i System,
and could lead to property damage, personal injury and/or
death. Installation and maintenance of the Hydran 201i System
must be carried out by qualified personnel only.
Before proceeding with any maintenance operation, review the
local safety regulations. Read all the warnings and
recommendations in Section 6.1.
Do not remove the cover, to prevent electric shock.
Do not use cleaning agents or chemicals, as they may damage
the plastic parts or lettering.
Page 193