Table of Contents
Advertisement
The remote control
∫ Batteries
≥Insert so the poles (i and j) match those in the remote control.
≥Do not use rechargeable type batteries.
Quick setup
Í
[1]
A.SRD
AUDIO ONLY
DEPTH ENH
GROUP
DIRECT NAVIGATOR
TOP
MENU
[3]`[6]
DISPLAY
[1]
SUBTITLE AUDIO ANGLE/PAGE QUICK REPLAY
7 Í/ I
The QUICK SETUP screen appears when you press [SETUP] the first
time after purchase and assists you to make necessary settings.
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
∫ TV Aspect
Select "4:3" (regular) or "16:9" (widescreen) to suit your television.
If you have a regular 4:3 television, you can also select how video on
some discs is shown (
page 20, Video—TV Aspect).
≥4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the screen
of a 4:3 aspect television (unless prohibited by the
producer of the disc).
≥4:3 Letterbox
Widescreen software is shown in the letterbox
style on a 4:3 aspect television.
R6, AA, UM-3
[2]0[6]
SLEEP
SETUP
OPEN/CLOSE
1
2
3
4
5
6
7
8
9
CANCEL
S
0
10
PAUSE
PLAY LIST
MENU
ENTER
RETURN
RETURN
D
E
DOUBLE RE-MASTER
ZOOM MODE
OPEN/CLOSE
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage
items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of
time. Store in a cool, dark place.
∫ Use
Aim at the sensor (
obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
[1]
Press [Í] to turn on the unit.
[2]
Press [SETUP] to show the QUICK SETUP
screen.
[3]
Press [3, 4] to select the menu language and
press [ENTER].
[4]
Press [3, 4] to select "Yes" to continue and
press [ENTER].
[5]
Press [3, 4] to select the item and press
[ENTER].
≥Audio language (
≥Subtitle language (
≥TV Type (
≥TV Aspect (
≥Progressive Out (Component) (
≥Speaker Setting (
DOWN
UP
[6]
Press [ENTER] and then [SETUP] to end the
settings.
To return to the previous screen
Press [RETURN].
To access this screen again later
page 20, Others—QUICK SETUP
∫ To enjoy progressive video
1. Connect to the component video input terminals on a 480P
compatible television. (Video will not be displayed correctly if
connected to an incompatible television.)
2. In QUICK SETUP, set "Progressive Out (Component)" to "Enable".
3. Change "Video output mode" to "480P" (
≥All televisions manufactured by Panasonic and that have 480P input
connectors are compatible. Consult the manufacturer if you have
another brand of television.
≥If the unit is connected to the television through VIDEO OUT or
S VIDEO OUT, output will be interlace, irrespective of the settings.
page 5, Control reference guide), avoiding
SETUP
Select the menu language.
SELECT
ENTER RETURN
page 20)
page 20)
page 20)
below)
page 20)
page 20)
page 19).
QUICK SETUP
English
Français
Español
9
Advertisement
Table of Contents
