General Instructions - Emerson Copeland 4MTL-05 Application Manuallines

1.3

General instructions

WARNING
System breakdown! Personal injuries! Never install a system in the field
and leave it unattended when it has no charge, a holding charge, or with the
service valves closed without electrically locking out the system.
System breakdown! Personal injuries! Only approved refrigerants and
refrigeration oils must be used.
WARNING
CO refrigerant! Danger of suffocation! Never release significant volumes
2
of CO or the entire contents of the system into closed rooms. In case of closed
2
room, if possible, keep the room well ventilated and/or install a CO
device. CO
2
case of emission.
WARNING
High shell temperature! Burning! Do not touch the compressor until it has
cooled down. Ensure that other materials in the area of the compressor do not
get in touch with it. Lock and mark accessible sections.
CAUTION
Overheating! Bearing damage! Do not operate compressor without
refrigerant charge or without it being connected to the system.
CAUTION
Contact with POE! Material damage! POE lubricant must be handled
carefully and the proper protective equipment (gloves, eye protection, etc.)
must be used at all times. POE must not come into contact with any surface
or material that it might damage, including without limitation, certain polymers,
eg, PVC/CPVC and polycarbonate.
IMPORTANT
Transit damage! Compressor malfunction! Use original packaging. Avoid
collisions and tilting.
2
is odourless and colourless, so it cannot be perceived directly in
detection
2
AGL_Stream_ST_4MTL_4MSL_E_Rev01