To Clean/Inspect The Engine Oil Filter; To Change The Gearbox Oil - Husqvarna TF544 Workshop Manual

2�2�9 To clean/Inspect the engine oil filter
1. Locate the engine oil filter.
2. Remove the retaining bolt (1)
3. Drain the engine oil (See to change the engine oil).
4. Pull out the oil filter cap (2) and remove the oil filter.
5. Clean or replace the oil filter.
6. Install the oil filter.
7. Make sure the oil filter cap (2) is fully seated.
8. Install and tighten the oil filter retaining bolt (1).
9. Add new engine oil to the engine.
2�2�10 To change the gearbox oil
1. Remove the gearbox drain bolt (A) to drain the oil.
2. Remove the gearbox dipstick.
3. Pour a small amount of petrol to clean the gearbox.
(2) (1)
4. Attach the gearbox drain bolt.
5. Pour oil into the gearbox.
6. Attach the dipstick to the gearbox.
Delivery and service
Full level
1,65 L
SAE-10W-30
A
English – 11