To Troubleshoot The Clutch Control; To Do A Check Of The Clutch Control Cables - Husqvarna Tf544 Workshop Manual

3�2�12 To troubleshoot the clutch control
1. Start the engine and put the shifting lever in gear
one. If the blades does not rotate, do a check of the
clutch control and cable.
2. Disengage the clutch control. If the blade rotation
does not stop, do a check of the clutch control and
cable.
3�2�13 To do a check of the clutch control
cables
1. Disengage the clutch.
2. Do a check that the clutch cable is not damaged.
3. Engage the clutch and do a check that the clutch
cable contracts 3-5mm
Appendices and schedules
English – 23