Appendices And Schedules; Troubleshooting Schedule - Husqvarna Tf544 Workshop Manual

3�1 Troubleshooting schedule
Fault Possible cause
Not enough fuel
The fuel system
is blocked.
The product
does not
activate
There is a press
relief.
The fuel
injection
advance angle
is abnormal.
Mount the oil
pump and start
the engine.

3 Appendices and schedules

Steps Troubleshooting
1 Do a fuel and oil switch check
2 Do a check of the fuel system
3 Do a check of the press relief condition of the cylinder
4 Do a check of the fuel injection advance angle.
5
Appendices and schedules
Action
Fill fuel and start the
machine
Make sure the fuel
control in open
position.
Make sure the fuel
tubes are not blocked.
Do a check of the fuel
filter
Do a check of the
amount of oil spray.
Do a check of the
valve clearance.
Do a check of the air
impermeability.
Check the abrasion of
the piston ring and
cylinder.
Adjust the fuel
injection advance
angle.
English – 17