I Nitial Start-Up - Clearaudio Double Matrix Professional SONI C User Manual

User manual / Bedienungsanleitung
5.3 Automatic and manual cleaning
• Antistatic brush
The antistatic brush arm is used to discharge any static that is
generated during the drying process. After completion of the
automatic programs or manual cleaning, the dry record should
pass the antistatic brush at least for 2-3 full rotations. Turn the
antistatic arm above the record to the outer point. The record will
start to turn and the constructed static will derived.
The antistatic function can only be activated with opened suction
arm.
Pic. 3: Turning the antistaic unit
After 2-3 full rotations, turn the antistatic arm back to the start position. The rotation of the record
ends automatically.
5.4 LED level indicator
Shows the level of cleaning fluid currently in the reservoir (0% to 100%).

6. I nitial start-up

Filling the cleaning fluid reservoir
Place the funnel supplied into the filling hole (Pic. 2, No. 11, page 7) and fill the fluid reservoir with
the Pure Groove essence cleaning fluid provided (max. 0.4l).
Pay attention to the LED level indicator so as not to over-fill. For effective cleaning we recommend
using only Clearaudio Pure Groove cleaning fluid (available at www.analogshop.de).
For the proper use of the provided cleaning fluid just mix the Pure Groove essence fluid with Ethanol
denat. (90%) / Isopropyl alcohol (90%), according to the following mixing ratio.
The result is the famous Pure Groove fluid.
Note:
During transport or shaking of the Pure Groove essence it can generate some foam.
The foam disappears after adding Ethanol/ Isopropyl alcohol and you can use the Pure Groove as
usual.
Mixing ratio:
250ml = 150 millilitre Pure Groove essence and you add 100 millilitre Ethanol denat. (90%) /
Isopropyl alcohol (90%).
Made in Germany Page / Seite 9