Table 4: System And Port Mode Leds; Table 5 Port Leds - Alcatel-Lucent OmniAccess SafeGuard Installation Manual

Chapter 1: Overview of the SafeGuard Controller
Table 4 describes the meanings of the system and port mode LEDs;
meanings of the port LEDs.
Table 4
Label
Power1
Power2
Alarm
Speed
Duplex
Status
Table 5
LED Position
Upper
Lower
20
System and Port Mode LEDs
Color Meaning
Green Lights when power supply 1 is on.
Green Lights when power supply 2 is on.
Amber Lights when an alarm condition exists.
Green Lights when the upper port LED indicates operating speed:
10, 100, or 1000 Mbps.
Green Lights when the upper port LED indicates port duplex
mode: full-duplex or half-duplex.
Green Lights when the upper port LED indicates port protection
mode: monitor, pass-through, or protect.
Port LEDs
Mode or Type Function
Speed
Duplex
Status
Link
Port operating speed
Port duplex mode
Port protection mode
Port link status
OmniAccess SafeGuard Controller Installation Guide
Table 5 describes the
Color and Meaning
Off: 10 Mbps
Green: 100 Mbps
Amber: 1000 Mbps
Off: Link down
Amber: Half-duplex
Green: Full-duplex
Blinking: Collision
Off: Pass-through
Amber: Monitor
Green: Protect
Off: Link down
Green: Link up
Blinking: Tx or Rx activity