Specifications - Sharp PN-C703D User Manual

nProduct Specifications
Model
LCD component
Max. resolution
Max. colors
Pixel pitch
Viewing angle
Screen active area
Computer input signal
Sync signal
Video color system
Plug and play
Input terminals PC/AV
PC
Audio
AV
Serial (RS-232C)
Output terminals Audio
Speaker output (internal/external)
Touch Panel Detection method
PC connector
Power requirement
Operating temperature *
2
Operating humidity *
2
Power consumption (Maximum / standby mode *
Dimensions (excluding protrusions)
Weight
*1 Composite video and component cannot be used simultaneously.
*2 In addition, check the requirements of the computer and other devices to be connected, and make sure that all requirements are satisfied
*3 When STANDBY MODE is set to LOW POWER. When STANDBY MODE is set to STANDARD: 23 W or less.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes fo product improvement
without prior notice. The performance specification figures indicated are nominal values of production units There may be some deviations from
these values in individual units.

Specifications

PN-C703B
70" Class [69-1/2 inch (176.6cm) diagonal] TFT LCD
(pixels) 1920 x 1080
Approx. 16.77 million colors
0.802 mm (H) × 0.802 mm (V)
160° right/left/up/down (contrast ratio ≥ 10)
inch (mm) 60-9/16 (W) x 34-1/16 (H) (1538.9 x 865.6)
Analog RGB (0.7 Vp-p) [75 Ω ], HDMI
Horizontal/vertical separate (TTL: positive/negative)
NTSC (3.58MHz)/NTSC (4.43MHz)/PAL/PAL-60/SECAM
VESA DDC2B
HDMI x 3
Mini D-sub 15 pin, 3 rows x 1
3.5 mm mini stereo jack x 1
Composite video RCA *
Component RCA (Y, Cb/Pb, Cr/Pr) *
Audio RCA pin (L/R) x 2
D-sub 9 pin x 1
RCA pin (L/R) x 1
10 W + 10 W/10 W + 10 W 6 Ω
Infrared blocking detection method
USB (2.0 compliant) x 1
AC 100 V - 240 V, 2.7 A, 50/60 Hz
41°F to 95°F (5°C to 35°C)
20% to 80% (no condensation)
) 235 W / 0.5 W
3
inch (mm) Approx. 64-5/16 (W) x 4-5/16 (D) x 39-1/8 (H) (1633 x 109 x 994.5)
lbs. (kg) Approx. 123.5 (56)
x 2
1
x 1
1