Advertisement
en_us | 47 | T10296
1 General Information
Product Name:
Product Type:
Product Number:
Weight:
Max. load capacity:
Static Test Coefficient: 3.0
Intended Use:
For supporting the engine and gearbox unit during
repair work in accordance with the workshop
manuals of the Volkswagen Group brands.
Terms of Use:
Only for qualified workshop personnel.
Only use the load holding device for work approved
by the Volkswagen Group.
Use only for loads up to 500 kg.
Use only in connection with a suitable engine and
gearbox jack (e.g. VAS 6931/VAG 1383A). (See
workshop manuals of the Volkswagen Group
brands.).
Do not hold or lift any persons or animals.
Do not hold or lift articles other than those
described in the workshop manuals of the
Volkswagen Group brands.
Do not stand under suspended loads.
Use only on level, horizontal and weight-bearing
ground.
Use only in connection with the approved
accessories (see workshop manuals of the
Volkswagen Group brands).
2018-06-15
Unit support
Load holding device
T10296
7.0 kg
500 kg
Figure 1:
Unit support T10296
1
Unit support T10296
2
Support bolt with square nut (2 pieces)
3
T10296/1 (2 pieces)
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Advertisement
Chapters
