Advertisement
en_us | 49 | T10296
3 Operating Instructions
1.
Check the unit support for completeness, as well
as visible damages like signs of wear, deformation,
breakages, cracks, and corrosion damages prior to
each use. Check all threads for damages and ease
of operation. Do not use the unit support when
defects are noted and discard it immediately.
2.
Assemble the unit support as described in the
workshop manuals.
3.
If necessary, check the correct assembly of the
support bolts T10296/1 as described in the
workshop manual.
4.
Place the unit support on the engine and gearbox
jack.
5.
Ensure the unit support is completely inserted in
the support of the engine and gearbox jack and
secured.
6.
Ensure the support bolt is centrally aligned.
7.
Position the unit support on the engine and
gearbox unit in accordance with the workshop
manuals and thereby observe the correct support.
WARNING
Risk of the load tilting or falling!
Incorrect attachment of the unit support to the load
may cause a tilting or falling of the load! This can cause
serious injuries and severe damage to materials.
Attach the unit support exactly as described in the
workshop manuals.
WARNING
Risk of injury through moving loads!
Crushing of limbs between load and vehicle can result
from movements like moving, lifting, or lowering of the
load.
Position hands and feet in such a manner that
crushing hazards do not exist when moving the unit
support.
Observe the unit support during all movements.
8.
Carry out further work as described in the
workshop manuals.
9.
Ensure that all parts of the special tool have been
removed after completing the repair work.
2018-06-15
4 Inspection and Maintenance
Check the unit support for completeness, as well as
visible damages like signs of wear, deformation,
breakages, cracks, and corrosion damages prior to
each use. Check all threads for damages and ease of
operation. Do not use the unit support when defects
are noted and discard it immediately.
Spare parts are available on request. Use only
original replacement parts.
Please contact your 1st level support representative
with any queries.
NOTICE
Modifications to this product which have not been
expressly approved by the manufacturer will void any
warranty. The manufacturer assumes no liability for
personal injury or damage to materials which occur as
the result of improper use of this product.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
Advertisement
Chapters
