Siemens SIMATIC NET Operating Instructions Manual page 85

cULus
c(UL)us Listed
Industrial Control Equipment E85972
Information Technology Equipment FOR HAZ.LOC. E240480
CL. 1, DIV. 2 GP. A, B, C, D, T4
CL. 1, Zone2, GP. IIC, T4
CL. 1, Zone2, AEx nC IIC, T4
Underwriters Laboratories Inc. complying with
● Standard No. ANSI/ISA 12.12.01-2000
Nonincendive Electrical Equipment for use in Class I and II, Division 2 and Class III,
Divisions 1 and 2 Hazardous (Classified) Locations
● Standard No. CAN/CSA C22.2 No. 213-M1987, 1st Ed.
Nonincendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations
Note for Australia - RCM
The product meets the requirements of the RCM standard.
Applied standards:
● AS/NZS CISPR11 (Industrial, scientific and medical equipment - Radio-frequency
disturbance characteristics - Limits and methods of measurement).
● EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
You will find the current versions of the standards in the currently valid RCM SDoCs (Self-
Declaration of Conformity).
MSIP 요구사항 - For Korea only
A급 기기(업무용 방송통신기자재)
이 기기는 업무용(A급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기
바라며, 가정 외의 지역에서 사용하는것을 목적으로 합니다.
Marking for the customs union
EAC (Eurasian Conformity)
Eurasian Economic Union of Russia, Belarus, Armenia, Kazakhstan and Kyrgyzstan
Declaration of conformity according to the technical regulations of the customs union
(TR ZU)
Optical link module
Operating Instructions, 01/2020, C79000-G8976-C270-06
Approvals
85