Siemens VS08G Series Instructions For Use Manual page 17

Changing the filter
*
Remove the foam and micro-hygiene filter.
* Depending on equipment level
*
Dispose of the micro-hygiene filter and fit a new
micro-hygiene filter.
Clean the foam and replace in the filter frame.
* Depending on equipment level
*
Clean the foam and replace in the filter frame.
* Depending on equipment level
If you have used the vacuum cleaner for fine dust particles (such as plaster or
cement), clean the motor protection filter by tapping it and, if necessary,
replace the motor protection filter and the micro-hygiene filter.
32
en
Changing the filter
*
*
Replacing the activated carbon filter
(Depending on equipment level)
Remove the activated carbon filter by pulling a tab
and dispose of it as normal waste.
* Depending on equipment level
Fit a new activated carbon filter.
* Depending on equipment level
Slide the filter frame under the two retaining ribs and
turn in the direction of the arrow until it engages.
Close the exhaust grille.
en
33